To install an IoT device, please follow these steps:
1. Open the Door App.
2. If you have access to multiple properties, Select the property where you want to install the device.
3. Open the Devices tile by selecting 'See All Devices.'
4. Tap 'Add Device.'
5. Scan the device's QR code.
Note: If you don't have access to the QR code or are experiencing issues scanning it with your phone, enter the serial number after tapping on 'I can't scan the code'.
6. Select the Unit you'd like to assign the device to or assign it to the building (communal spaces).
7. Follow the step-by-step instructions provided by the App for each device to complete the process.
Note: if you selected 'Add a Device' without choosing a specific Unit in step 4, you'll need to select whether the device is to be installed in the property as a whole (selecting the property name under 'Building') or select the specific Unit during the step-by-step installation process.
For more information about specific IoT devices, please check the articles below:
Door Non-Cellular Hub Quick Start Guide
Door Cellular Hub Quick Start Guide
Door Thermostat Quick Start Guide
Door Dimmer Switch Quick Start Guide
Door Power Switch Quick Start Guide
Door Open and Close Monitor Quick Start Guide
Door Motion Detector Quick Start Guide
Door Leak Detector Quick Start Guide
Door Leak Lasso Quick Start Guide
Door Temperature and Humidity Monitor Quick Start Guide